Assessment and BMPs for Floriculture Outdoor Production in Ontario

This project demonstrated the differences in leachate (direct pot runoff) from outdoor container production from a range of fertilizers (formulation, rate) in both overhead and drip irrigation systems. Both hydrangea and chrysanthemum crops were examined, with sites across Southern Ontario (primarily in the Leamington-London region that drains into the western basin of Lake Erie, and the Niagara peninsula). Comparisons of key nutrients (especially phosphorus and nitrogen) were made, in addition to overall plant growth parameters, costing comparisons (CRF vs. WSF), and after-sales plant performance. The goal of the project was to provide benchmarking and guidance on improved nutrient and fertilizer best management practices (BMPs) for outdoor floriculture production in Ontario.

Demonstration of energy-saving dehumidification in Ontario greenhouses (GRET)

Four dehumidification technologies were tested at three different facilities over a three year period: commercial mechanical refrigeration dehumidifier (MRD), chemical liquid desiccant dehumidifier (LDD), air-to-air heat recovery ventilation system (HRV), and finally a prototype called energy recovery ventilation (ERV), which is a combination of liquid desiccant approach (wet mode) and an air-to-air heat exchanger (dry mode). Overall, energy savings could be achieved, but the dehumidification systems controls needed. to be strategically integrated in the greenhouse computer control system logic in a manner that resulted in optimal performance in order for the savings to be significant. A method for in-house qir quality monitoring was developed using 3M Petrifilms, and showed a linear correlation with standard air quality testing methods.